- 144 1/4 oz (7 gram) segments- 12 strips with 12 segments per strip - Self adhesive segments - Black powder coated finish is perfect for black wheels - Adhesive backed steel wheel weights - Adhesive will work on spoked or cast wheels - Ideal size for motorcycle use - Made from steel; lead free - 20.4mm x 12.5mm; horizontal orientation. Note installation recommendations: When applying wheel weights to a wheel; the wheel must be clean; dry; free of solvents and oils and at a minimum temperature. Motion Pro recommends using a water based cleaner like Formula 409 to remove grease and dirt; and then wipe down the wheel with Isopropyl Alcohol to make sure of a clean and dry surface for application of the wheel weights. Minimum temperature for application of wheel weights should be at least 60 degrees Fahrenheit. Some solvents and contact cleaners may leave a residue behind that will prevent proper adhesion of the wheel weights. Removal of old adhesive can be easily accomplished with a citrus based solvent; do not use products like WD40 to remove the old adhesive; as it will leave a significant oily residue behind that will prevent proper adhesion. Temperatures below 60 degrees F will not allow proper adhesion of the wheel weights; and keep in mind that any solvents used will evaporate slower at lower temperatures; so allow more time at low temps when cleaning wheels.
Angaben zur Produktsicherheit
Herstellerinformationen:
MOTION PRO
Swetzer Road 3171
Kalifornien
Loomis, Vereinigte Staaten, 95650
racesupport@motionpro.com
verantwortliche Person:
Motorcycle Storehouse B.V.
Gotenburgweg 46
Groningen, Niederlande, 9723 TM
info@mcseurope.nl
Es gibt noch keine Bewertungen.
